680ES Gas-Power Cutter
Now 50:1 (2%) Fuel-to-oil!

Description

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value.

Easy to start with a new multifunction lever to control choke, run, and stop functions.

The powerhead houses specially designed carburetion and ignition systems that work together for easy starting, cooler operation, and dependable performance at just about any elevation.

Available with 12 in. (30 cm) and 14 in. (35 cm) guide bars and the entire line of FORCE3® Series diamond chain.

WARNING:
This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

680ES Powerhead only MSRP $1454
680ES Saw packages start at MSRP $2122
Click below to purchase or to see other packages.

FEATURES AND BENEFITS

  • Polyester air filter designed specifically for wet cutting
  • Operates FORCE3™ diamond chain consumables up to 14 in. (35cm)
  • Multifunction lever controls choke, throttle advance, run and stop modes
  • Extended drive sprocket adapter offers easy chain assembly
  • Deep cutting solution for obstructed or small openings
  • Cut squares as small as 4 in. x 4 in. (10 cm x 10 cm)
  • Easy-to-start in all weather

Engine Type 2-stroke, Air Cooled
Displacement 76.5 cc (4.7 cu-in)
Horsepower 3.7 kW (5 hp) @ 9,500 rpm
Torque 4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Speed 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Chain Speed at Maximum Power 34.5 m/s (6800 ft /min)
Weight 9.5 kg (21 lbs) powerhead only
Dimensions 46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width
Starter Dust and water resistant
Ignition Special water resistant electronic ignition
Fuel ratio 2% (50:1) gasoline-to-oil
Fuel Capacity 0.88 liter (0.23 gallon)
Water Supply Requirement Minimum: 1.5 bar (20 psi)
Water Flow Requirement Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1) 117 dB(A) (Kwa=3.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa 101.0 dB(A) (K = 2.0 dB(A))
Vibration, ahv eq Concrete Cutting (2) 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle

1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 / (2) Measured in accordance with ISO5349=1:2001 and IS 22867:2011

Product Support

Get help with troubleshooting and service issues.

Find Support

Product Registration

Activate your warranty and get premium support and more.

Register a Product

Featured Videos

695 Air Filter and Spark Plug

Replacing these two inexpensive items regularly can extend the life of your saw. Click below for instructions

695 and 890 Post Use Recommendations

You’re done for the day, we show you how put your tools away clean and ready for tomorrow

695 Daily Inspection

How to inspect the 695 daily to get the best life out of your saw

Also Available

2-Stroke Engine Oil

View Product

3P8 HF Wire Saw

View Product

6-10 HF Wall Saw

View Product
-